Application |
Application | simple evaluation of rotating and linearmovement with regard to underspeed; blocking |
Switching function | output is switched during the start-up delay and if (f actual) is greater than (f preset) |
Electrical design | DC PNP |
Switching output | normally open |
Electrical data |
Nominal voltage [V] | 10...36 DC |
Current consumption [mA] | < 15 |
Reverse polarity protection | yes |
Outputs |
Transistor |
Current rating (continuous) [mA] | 250 |
Current rating (peak) [mA] | 250 |
Voltage drop [V] | < 2.5 |
Short-circuit proof | yes |
Overload protection | yes |
Range |
Sensing range [mm] | 10 |
Correction factors | mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.5 / Al approx. 0.4 / Cu approx. 0.3 |
Measuring / setting range |
Setting range [pulses/min.] | 5...300 |
Adjustment of the switch point | multiturn potentiometer |
Hysteresis [% of Sp] | 10 |
Start-up delay [s] | 15 |
Reaction times |
Damping frequency (max.) [pulses/min] | 15000 |
Environment |
Ambient temperature [°C] | -25...80 |
Protection | IP 67 |
Safety classification |
MTTF [a] | 898 |
Mechanical data |
Mounting | flush mountable |
Housing materials | brass special coating; PBT (Pocan) |
Weight [kg] | 0.257 |
Displays / operating elements |
Input pulses LED | yellow |
Output status indication LED | green |
Electrical connection |
Connection | PVC cable / 2 m; 3 x 0.5 mm2 |
|
Remarks |
Pack quantity [piece] | 1 |